DY GRAVER Folded High Flow CartridgeTBG-5-40-P2 is made of imported polypropylene fiber membrane and adopts special horizontal folding technology, which makes the single cartridge have a large filtration area. Compared with the traditional longitudinal folded cartridge, it can effectively increase the dirt-holding capacity of the cartridge, and reduce the production and operation cost.

　　Product Characteristics

　　-Large filtration area, effectively extend the service life;

　　-The number of filter elements to be replaced is greatly reduced, thus saving labor costs;

　　-Sealed interface design reduces the risk of bypass flow, thus improving filtration efficiency;

　　-Wide range of chemical applicability for a variety of applications.

　　Technical specifications

　　-Cartridge Size: OD: 6.5” (165mm)

　　Length: 40” (1040mm)

　　-Component Material: Filter Material: Polypropylene (PP)

　　Support/Direction Layer: Polypropylene

　　End cap material: glass fiber reinforced polypropylene

　　Seal material: ethylene-propylene rubber, nitrile rubber, Teflon-coated fluorine rubber

　　-Cartridge performance: Filtration precision: 1μm, 3μm, 5μm, 10μm, 20μm, 50μm, 70μm;

　　High operating temperature:80℃;

　　Large pressure drop: 3.4Barat82℃;

　　Recommended pressure drop for cartridge replacement: 2.4Bar, 20°C;

　　Recommended large filtered water flow rate: 1200LPM.

　　Application areas:

　　-Large reverse osmosis pretreatment filtration;

　　-Electronic industry high-purity water pre-filtration;

　　-Petrochemical industry amine liquid filtration, oilfield reinjection water filtration;

　　-Electric power, coal chemical industry security filtration, seawater desalination pretreatment.