High-flow cartridge has always been the cartridge industry in the use of a more widely used type of cartridge, in many areas have its figure, in the use of high-flow cartridges, often encountered for the replacement of the problem, then how in the end to replace the high-flow cartridge is the right thing to do, the next small make up for you to introduce the replacement of high-flow cartridges step by step.

First of all, we have to turn off the plating ball valve and the pressure drum ball valve before replacement, and then open the gooseneck faucet to remove the residual liquid from the pipeline.

Secondly, after the liquid inside is no longer out, then use the filter shell wrench to open the filter shell with the high-flow cartridge, take out the old high-flow cartridge, and then load in the new high-flow cartridge of the same standard.

Next, apply lubricant to the black O-ring at the top of the filter housing and place the O-ring into the groove in the filter housing. Tighten the filter housing vertically to prevent the O-ring from shifting.

After completing the above steps, the replacement of the high-flow cartridge is basically completed. After assembling, the plating ball valve and the ball valve of the pressure tank can be opened to continue to play the filtration.

In addition, Dayu Filtration reminds us that there is often liquid spillage on the way of replacing the high-flow cartridge, so we can prepare tools such as a water basin or a towel to avoid leakage.